IRP extension de pull start
5 participants
HPI BAJA FRANCE :: Accueil :: Les news
Page 1 sur 1
IRP extension de pull start
Hello,
Buddy vient de sortir une extension de pull start d'excellente facture et à un très bon prix : 15USD (sans expé).
Si vous etes interessé, je vais m'en prendre un donc on peux grouper ...
Le texte initial :
I have chosen to go ahead with this and I will be offering it in 2 different variations since there are so many different applications .
I received multiple pm's and emails asking about different Truck Bodies, Cages, Buggies, EDM's , Modified's , and so on .
So 2 kits is the way to go.
1) A Universal " Cut to Fit Kit " , like it says this version will have a longer than needed tube in the package that the end user will cut to fit for their application .
2) A " pre-cut " version for the Losi 5ive T , this version is already cut to the proper length for the Losi 5ive T ( see pic below )
The price on either kit is $ 14.99 plus a couple bucks shipping , since the initial response was so good I went ahead and ordered a Large quantity of the Delrin Acetal Resin Tube to get the price down .
International and Priority , if you want priority shipping will be figured at time of purchase .
I have 4 of the Universal Kits ready to ship now and 1 of the Losi 5ive kits left .
I will have another 20 of the Universal kits and 10 of the Losi kits ready by Thursday of this week .
These will be up on the website Thursday evening or Friday morning.
For now the only way to purchase one of these is by way of PM through this forum until I get the inventory levels stocked.
What's Included in the Kit
1 x Delrin Acetal Resin Tube
2 x Rubber Inserts / stoppers
1 x Detailed Written Instruction Sheet
1 x Inertia Racing Products Decal
For the Universal kits, trimming the tube is simple enough , you won't need some specialty blade to do so, a simple hack saw or Dremel using a cut off wheel will do the job.
If you want the length longer for the Losi then what is in the pic , go ahead and get the universal kit and cut to your preferred length .
Thanks for the Support !
have fun
Buddy vient de sortir une extension de pull start d'excellente facture et à un très bon prix : 15USD (sans expé).
Si vous etes interessé, je vais m'en prendre un donc on peux grouper ...
Le texte initial :
I have chosen to go ahead with this and I will be offering it in 2 different variations since there are so many different applications .
I received multiple pm's and emails asking about different Truck Bodies, Cages, Buggies, EDM's , Modified's , and so on .
So 2 kits is the way to go.
1) A Universal " Cut to Fit Kit " , like it says this version will have a longer than needed tube in the package that the end user will cut to fit for their application .
2) A " pre-cut " version for the Losi 5ive T , this version is already cut to the proper length for the Losi 5ive T ( see pic below )
The price on either kit is $ 14.99 plus a couple bucks shipping , since the initial response was so good I went ahead and ordered a Large quantity of the Delrin Acetal Resin Tube to get the price down .
International and Priority , if you want priority shipping will be figured at time of purchase .
I have 4 of the Universal Kits ready to ship now and 1 of the Losi 5ive kits left .
I will have another 20 of the Universal kits and 10 of the Losi kits ready by Thursday of this week .
These will be up on the website Thursday evening or Friday morning.
For now the only way to purchase one of these is by way of PM through this forum until I get the inventory levels stocked.
What's Included in the Kit
1 x Delrin Acetal Resin Tube
2 x Rubber Inserts / stoppers
1 x Detailed Written Instruction Sheet
1 x Inertia Racing Products Decal
For the Universal kits, trimming the tube is simple enough , you won't need some specialty blade to do so, a simple hack saw or Dremel using a cut off wheel will do the job.
If you want the length longer for the Losi then what is in the pic , go ahead and get the universal kit and cut to your preferred length .
Thanks for the Support !
have fun
UnlimiteD- Modérateur
- Age : 45
Localisation : 5.4 - tu peux pas test
Modèle de Rc : 5.62
Date d'inscription : 02/05/2010
Re: IRP extension de pull start
Lut,
Il a repris l'idée qu'avait eu Pittbull RC à l'époque. C'est une option fort intéressante quand il n'y a pas trop de place pour aller attraper la tirette dans l'arceau ou la carros.
Si jamais, parle lui en, il faudrait qu'il étudie le même pour le lanceur TR V2. Moi par exemple j'ai deux baja équipé en Lanceur TR V2 qui serait intéressé par cette extension
Il a repris l'idée qu'avait eu Pittbull RC à l'époque. C'est une option fort intéressante quand il n'y a pas trop de place pour aller attraper la tirette dans l'arceau ou la carros.
Si jamais, parle lui en, il faudrait qu'il étudie le même pour le lanceur TR V2. Moi par exemple j'ai deux baja équipé en Lanceur TR V2 qui serait intéressé par cette extension
La taupe- Admin
- Age : 45
Localisation : Chartres
Pseudo ebay : Lataupebaja
Modèle de Rc : Baja black Long Rod +5mm & BRCP 2 speed en cour de modification=
Baja OGGY
Baja 5T avec moteur MM2
Pis 4 Mini z mr 03
Date d'inscription : 03/11/2007
Re: IRP extension de pull start
hello Matt,
je viens de lui demander, je te dis
je viens de lui demander, je te dis
UnlimiteD- Modérateur
- Age : 45
Localisation : 5.4 - tu peux pas test
Modèle de Rc : 5.62
Date d'inscription : 02/05/2010
Re: IRP extension de pull start
Oka merki
La taupe- Admin
- Age : 45
Localisation : Chartres
Pseudo ebay : Lataupebaja
Modèle de Rc : Baja black Long Rod +5mm & BRCP 2 speed en cour de modification=
Baja OGGY
Baja 5T avec moteur MM2
Pis 4 Mini z mr 03
Date d'inscription : 03/11/2007
Re: IRP extension de pull start
Matt, a priori ca ce monte
Buddy a vendu un set à un possesseur de V2, il va lui demander des photos installé, je fais suivre ...
Buddy a vendu un set à un possesseur de V2, il va lui demander des photos installé, je fais suivre ...
UnlimiteD- Modérateur
- Age : 45
Localisation : 5.4 - tu peux pas test
Modèle de Rc : 5.62
Date d'inscription : 02/05/2010
Re: IRP extension de pull start
Ok merci pour l'info. suis curieux de voir le montage.
La taupe- Admin
- Age : 45
Localisation : Chartres
Pseudo ebay : Lataupebaja
Modèle de Rc : Baja black Long Rod +5mm & BRCP 2 speed en cour de modification=
Baja OGGY
Baja 5T avec moteur MM2
Pis 4 Mini z mr 03
Date d'inscription : 03/11/2007
Re: IRP extension de pull start
Plop,
Alex., t'as eu des news??
Alex., t'as eu des news??
La taupe- Admin
- Age : 45
Localisation : Chartres
Pseudo ebay : Lataupebaja
Modèle de Rc : Baja black Long Rod +5mm & BRCP 2 speed en cour de modification=
Baja OGGY
Baja 5T avec moteur MM2
Pis 4 Mini z mr 03
Date d'inscription : 03/11/2007
Re: IRP extension de pull start
Salut, c'est vrai que ça peut faciliter la préhension de la poignée surtout lorsqu'on a les vitres arrières.
KYRIAN- Pro
- Age : 50
Localisation : Grenoble
Modèle de Rc : Baja 5b + mta4 s28 + Losi 5ive T
Date d'inscription : 17/05/2009
Re: IRP extension de pull start
Yop
Des nouvelle de la version turtle ?
Des nouvelle de la version turtle ?
kryption- Expert
- Age : 29
Localisation : francia
Pseudo ebay : Pseudo ebay
Modèle de Rc : baja 5b ss
Date d'inscription : 20/12/2010
Re: IRP extension de pull start
Salut,
Intéressé par cette extension de pull start (autrefois produit par pitbull RC et qui existe aussi en version alu produit par Fonzie's RC), j'ai pris contact avec IRP pour glaner quelques infos notamment la compatibilité avec le lanceur TR V2 ainsi que la possibilité d'envoyer en France (actuellement impossible sur leur site de vente en ligne)
Si c'est pas possible, ce sera du "home made" pour ma part (pas bien compliqué à faire)
Je vous tiens au jus dès que j'ai une réponsede leur part
@+
Intéressé par cette extension de pull start (autrefois produit par pitbull RC et qui existe aussi en version alu produit par Fonzie's RC), j'ai pris contact avec IRP pour glaner quelques infos notamment la compatibilité avec le lanceur TR V2 ainsi que la possibilité d'envoyer en France (actuellement impossible sur leur site de vente en ligne)
Si c'est pas possible, ce sera du "home made" pour ma part (pas bien compliqué à faire)
Je vous tiens au jus dès que j'ai une réponsede leur part
@+
Pytou- Basheur de l'extrême
- Age : 107
Localisation : Queven (Morbihan)
Modèle de Rc : - HPI Baja Sandrail "Sidewinder" X5 full options, moteur zenoah 29cc prepa hobby center, embrayage 4 pts Lauter, Victory RC Bigbore
- HPI Baja court "The Short Basher", moteur zenoah G320RC, Victory RC Propipe
- HPI Baja "The Darkvenger", moteur SCZ-E290, pot Vador500
Date d'inscription : 22/04/2007
Re: IRP extension de pull start
Yop,
Réponse quasi immédiate de Buddy de chez IRP :
"On the pull start extensions ,
the Losi extension is 4" or 113mm overall , the tube itself is 3.5" or 88mm then there are 2 rubber inserts that go in the ends of the tube.
the universal is 5.5" or 138mm overall , the tube itself is 5" or 128mm plus the rubber inserts in each end of the tube.
If you need a special length of tube I can make them up for you , I just need your specific measurements.
as to working with TR pull start I have Not heard that they will not work so I assume everything is good there, I have sold hundreds of these and I assume some have been installed with the TR system.
My extensions do Not screw into the pull start, they just go between the handle and the pull start housing.
as to shipping , it should be about $ 9.00 for 1st Class Mail , or $ 23.50 Flat Rate Priority Mail."
Cela répond bien aux questions posées...
Le seul hic c'est le fait que le tube n'est pas forcément solidaire du pull start car s'il ne se visse pas, peut il seulement à minima s'emboîter
Réponse quasi immédiate de Buddy de chez IRP :
"On the pull start extensions ,
the Losi extension is 4" or 113mm overall , the tube itself is 3.5" or 88mm then there are 2 rubber inserts that go in the ends of the tube.
the universal is 5.5" or 138mm overall , the tube itself is 5" or 128mm plus the rubber inserts in each end of the tube.
If you need a special length of tube I can make them up for you , I just need your specific measurements.
as to working with TR pull start I have Not heard that they will not work so I assume everything is good there, I have sold hundreds of these and I assume some have been installed with the TR system.
My extensions do Not screw into the pull start, they just go between the handle and the pull start housing.
as to shipping , it should be about $ 9.00 for 1st Class Mail , or $ 23.50 Flat Rate Priority Mail."
Cela répond bien aux questions posées...
Le seul hic c'est le fait que le tube n'est pas forcément solidaire du pull start car s'il ne se visse pas, peut il seulement à minima s'emboîter
Pytou- Basheur de l'extrême
- Age : 107
Localisation : Queven (Morbihan)
Modèle de Rc : - HPI Baja Sandrail "Sidewinder" X5 full options, moteur zenoah 29cc prepa hobby center, embrayage 4 pts Lauter, Victory RC Bigbore
- HPI Baja court "The Short Basher", moteur zenoah G320RC, Victory RC Propipe
- HPI Baja "The Darkvenger", moteur SCZ-E290, pot Vador500
Date d'inscription : 22/04/2007
Sujets similaires
» Drill Motor Quick Start (Roto Start)
» Extension de roues UberRC
» BZH LIGUE 19 SAISON 2009 START
» Reely système "Roto Start" pour moteurs 1/5
» Extension de roues UberRC
» BZH LIGUE 19 SAISON 2009 START
» Reely système "Roto Start" pour moteurs 1/5
HPI BAJA FRANCE :: Accueil :: Les news
Page 1 sur 1
Permission de ce forum:
Vous ne pouvez pas répondre aux sujets dans ce forum
|
|