Kill switch RCEXL
Page 1 sur 1
Kill switch RCEXL
Hello: qui as déjà entendu parler de ce kill switch:
PLus 'info sur le site ww.rcexl.com mais voici les spec de ce kill switch:
----------------------------------------------------------------------------------------------------------------------
This device allows you to safely and remotely kill your electronic ignition equipped engine from your transmitter.
This kill switch is Fiber Optically Coupled to isolate your ignition system from your radio system. (No interference II)
Features:
1. Includes a remote mountable bright LED to indicate when the ignition is armed.
2. Fiber Optic Coupled Input/output.
3. PIC12F675 Controller.
4. Li-Po/Li-ion/A123/Ni-Mh/NiCad Input.
5. Up to 20 Volt 16 amp MOS-FET(IRF7456) output.
6. Low to 3 Volt 3 amp OUTPUT.
7. Low Voltage Drop-Less than 150mv.
8. 100% Surface Mount Technology.
9. Heavy Gauge Wires, universal connectors.
10. Small and light weight-only 0.3 OZ!(8g).
11.Shut down the transmitter power or receiver to cut off automatically when kill engine.
This device plugs into a spare receiver channel.
This is a must have safety device for any gas powered plane!
This device allows you to safely kill your engine at anytime (on the ground or on the air) or when out of control also allows.
Note: The kill switch not including BEC Function(Battery Eliminator Circultry) Payment
-----------------------------------------------------------------------------------------------------------------------
Prix: une 15 aine d'euro sur ebay, ca vaux le coup si ca marche sur no baja.
A+.
Yoch.
PLus 'info sur le site ww.rcexl.com mais voici les spec de ce kill switch:
----------------------------------------------------------------------------------------------------------------------
This device allows you to safely and remotely kill your electronic ignition equipped engine from your transmitter.
This kill switch is Fiber Optically Coupled to isolate your ignition system from your radio system. (No interference II)
Features:
1. Includes a remote mountable bright LED to indicate when the ignition is armed.
2. Fiber Optic Coupled Input/output.
3. PIC12F675 Controller.
4. Li-Po/Li-ion/A123/Ni-Mh/NiCad Input.
5. Up to 20 Volt 16 amp MOS-FET(IRF7456) output.
6. Low to 3 Volt 3 amp OUTPUT.
7. Low Voltage Drop-Less than 150mv.
8. 100% Surface Mount Technology.
9. Heavy Gauge Wires, universal connectors.
10. Small and light weight-only 0.3 OZ!(8g).
11.Shut down the transmitter power or receiver to cut off automatically when kill engine.
This device plugs into a spare receiver channel.
This is a must have safety device for any gas powered plane!
This device allows you to safely kill your engine at anytime (on the ground or on the air) or when out of control also allows.
Note: The kill switch not including BEC Function(Battery Eliminator Circultry) Payment
-----------------------------------------------------------------------------------------------------------------------
Prix: une 15 aine d'euro sur ebay, ca vaux le coup si ca marche sur no baja.
A+.
Yoch.
yochyoch- Pro
- Age : 47
Localisation : Strasbourg
Pseudo ebay : Pseudo ebay
Modèle de Rc : HPI BAJA 5T
Date d'inscription : 29/12/2008
Re: Kill switch RCEXL
Hello: personne ne connait ce kill switch, Pas d'avis?
Peut être alors qu'il n'est pas adapaté à no baja...
Yoch.
Peut être alors qu'il n'est pas adapaté à no baja...
Yoch.
yochyoch- Pro
- Age : 47
Localisation : Strasbourg
Pseudo ebay : Pseudo ebay
Modèle de Rc : HPI BAJA 5T
Date d'inscription : 29/12/2008
Page 1 sur 1
Permission de ce forum:
Vous ne pouvez pas répondre aux sujets dans ce forum
|
|