Gizmo motors rcmk 30,5cc pro mod

Hello my French hpi homies..
ça va??

Ok, let´s cut the chit chat..
I have bought new engine from GIZMO MOTORS, and it is ported version of the rcmk new buggy version and it has 30mm crankshaft.
It is so called long block, because it comes with out coil,clutch and flywheel cover.
This is the model what i am talking about.
http://www.gizmomotors.com/index.php?page=shop.product_details&flypage=flypage_images.tpl&product_id=2248&category_id=136&option=com_virtuemart&Itemid=56
I have allready bought obr clutch housing what has oil seal on it.

If you are going to use one of these housing´s, you also need this machined clutch housing.



Clutch installed and i know it is reserved, because i like it so, you might want to try it too, it will bite better on the clutch bell, if you dont believe me, just try, but it wont work with stock engine.

Also got my bzm velocity stack, i just love this model, it is much better than those normal version, this has a neck, so you will every time put that air filter on same place.

Still waiting some importand parts from USA.
I hope that they would come tomorrow or friday..
So when i get them all be back to this item..

Cheers

Juha from Finland

Salut
Nous somme aussi entrain de tester ce moteur
http://www.hpibajafrance.com/t23869-rcmk-pro-mod-295cc-75hp?highlight=rcmk

in french serai mieux pour tous je pense.... mais intéressant tout de meme

Salut
Well Is that gizmo motors pro mod model 30,5cc??
It is not the same as i put bosun mine is ported ala gizmo motors..pardon
That 29,5cc has not same torque as it is in this 30,5cc.

Pipe im going to use is victory-rc bigbore pipe and wt-990 walbro carburator.

http://www.gizmomotors.com/index.php?page=shop.product_details&flypage=flypage_images.tpl&product_id=2229&category_id=136&option=com_virtuemart&Itemid=56
vs
http://www.gizmomotors.com/index.php?page=shop.product_details&flypage=flypage_images.tpl&product_id=2248&category_id=136&option=com_virtuemart&Itemid=56

donkihot a écrit:Salut
Well Is that gizmo motors pro mod model 30,5cc??
It is not the same as i put bosun mine is ported ala gizmo motors..pardon
That 29,5cc has not same torque as it is in this 30,5cc.

Oui le mien est un 29,5cc et le votre en 30,5
Mais la préparation gizmo est la même
Bonne continuation dans votre projet
Faite nous vite une vidéo pour comparer la différence entre le 30,5 et le 29,5

The 2 engines have the same porting and the 30.5 may have more torque and the 29.5 will rev higher.
As labecane says it will be interesting to compare the 2 engines.

We actually have 3 different engines

30.5cc complete rcmk
29.5 cc complete rcmk
29.5 cc rcmk and zenoah crank case

The porting on these engines is the same but the power output will be different

HE 's beautiful !!!!

Salut tout le monde!

Je vais vous montrer la vidéo dans quelques semaines quand je reçois les articles de États-Unis à bientôt!

Son anglais est vraiment très clair, je ne vois pas de problème, et ça nous ferais un bon exercice à tous de traduction.

l’oisiveté est la mère de tous les vis, mes amis

xavier a écrit:Son anglais est vraiment très clair, je ne vois pas de problème, et ça nous ferais un bon exercice à tous de traduction.

l’oisiveté est la mère de tous les vis, mes amis

L'utilisation de Google traduction (par ex.) peut vraiment aider pour ceux qui ne comprennent pas.

donkihot a écrit:Salut tout le monde!

Je vais vous montrer la vidéo dans quelques semaines quand je reçois les articles de États-Unis à bientôt!

Bonjour amigos.

That text is not mine writing, i only gave instructions what to write, my wife sister wrote it
She has been working in France, and she speeks Frenc quite well.
But what i need to say is, that i am waiting few packages from ddm and when i get them i can finish my engine
and can take it to a test drive.
Merci

En gros, il attend des colis de DDM pour aller tester son moteur

Merci pour sharing !

Finally after a month waiting those ddm packages arrived today..
Engine is ready, but im not gonna drop this to baja, it is going to mcd rr v4, and im having it next month..
Few pictrures how it looks now..

Now the engine is ready to go, just need to wait that mcd to arrive..
Maybe in 3-weeks for now and i have that car..
Could not wait to put the turtle v2 pull start to this, so i stip it down from the baja and put that stock pull start to baja.
That combo looks really nice now, what do you guys think?





Please dont ask me why i choose that lime green pre filter for the dt-1, im not sure even my self :lol2:

hi
Which tuned pipe are you gonna run with ?

really nice engine btw + indeed that green thing is awk, lol

salut

il s'agit du lanceur spécial rcmk ??

merci mi amigos:)
Im going to use this engine in my mcd rr v4.
Pipe is going to be samba four power ultimate and the latest version.
I will send you some video when i get that car and put this monster on to the car..

kryption a écrit:salut

il s'agit du lanceur spécial rcmk ??

faut lire mon ami

donkihot a écrit:
Could not wait to put the turtle v2 pull start to this,

salut

traduction please ??

merci

turtle V2, il y a pas besoin de traduction je crois

si tu ne prend meme pas la peine de lire. je ne peux rien faire pour toi

oui je sais qu'il s'agit d'un turtle v2

juste savoir si c'est la version spéciale rcmk ou une adaptation

ya celui pour zenoah et celui pour rcmk qui est pas sorti il me semble

il n'existe qu'un seul version du turtle V2, et c'est cella là:

http://www.davesmotors.com/s.nl/c.885035/n.1/it.A/id.8608/.f

Selon la description, il est écris que tout les moteur muni de l'ancien systeme ( zenoah ou CY ) sont compatibles.

or les moteur RCMK, utilisent les memes lanceur que nous.
http://www.davesmotors.com/s.nl/c.885035/n.1/it.A/id.9825/.f


donc il n'existe qu'une seule version du Turtle V2..

ce n'est pas moi qui le dit

http://www.hpibajafrance.com/t20639p75-new-lanceur-turtle-racing